209 potting boxes potting boxes subject to technical modification without notice. typographical and other errors do not justify any claim for damages. stand: 01/02 e copyright ?2002 okw geh?usesysteme gmbh, buchen, germany (http://www.okw.com)
210 potting boxes boxes for encapsulating electronic assemblies. with special cost advantages in cases of series production because potting electronic assemblies in pre-assembled cases is less complicated than casting liquid resin-hardener compounds in metal moulds. potted assemblies are protected from shock and temperature, humidity and chemical influences. production-limited surface quality. service-centre see pages 221-227. part-no. part-no. outside dim. in mm wall-thickness version box lid a b c w (mm) 20 20 13 0.8 i 25 25 15 0.8 i 25 25 25 0.8 i 30 20 15 1.0 i 40.6 13.8 16 1.0 i 40.4 13.7 25 0.8 i 40 40 13 1.0 i 40 40 20 1.0 i 45 30 15 1.0 i 45 30 25 1.0 i 50 13 15 1.0 i 50 50 15 1.3 i 50 50 25 1.3 i 50.7 50.7 50 1.6 i 70.5 50.5 20 1.4 i 70.8 50.8 35 1.4 i 90 60 20 1.5 i 100 50 25 1.5 i 100 100 40 2.0 i a 81 10 100 a 80 10 400 a 81 10 500 a 80 10 250 a 81 90 600 a 80 90 200 a 81 70 500 a 80 70 350 a 81 70 500 a 80 70 200 a 81 50 500 a 80 50 500 a 81 50 500 a 80 50 250 a 81 50 500 a 80 50 160 a 81 50 130 a 80 50 150 a 81 45 300 a 80 45 250 a 81 45 300 a 80 45 150 a 81 40 400 a 80 40 200 a 81 40 400 a 80 40 130 a 81 40 130 a 80 40 250 a 81 40 130 a 80 40 160 a 81 30 200 a 80 30 150 a 81 25 250 a 80 25 251 a 81 25 250 a 80 25 150 a 80 20 130 due to adjustment of the production there are slight tolerances possible. potting boxes material duroplastic. resistant to deformation and extreme temperatures. inflexible, therefore not re- sistant to fracture. refer to the material specifications on pages 229-231. standard colour black. version i
211 potting boxes material thermoplastic, polyamide 6.6. good value for money. almost unbreakable. with elastic side panels. there- fore only partly resistant to deformation. refer to the material speci- fications on pages 229-231. standard colour black. outside dim. in mm wall thickness in mm version part-no. abc w 14 14 11.5 0.8 ii 17.3 14.8 10.5 0.6 ii 17.3 14.8 15.2 0.6 ii 18.4 18.4 13.5 0.6 iii 20.5 20.5 12.5 0.8 iii 21 13 17.5 0.8 iii 22.3 22.3 14 0.8 iii 26 26 35 1.0 iii 28.7 28.7 19 1.0 iii 30 30 50 1.5 iii 32.3 32.3 20 1.0 iii 38.8 38.8 26.5 1.2 ii 38.8 38.8 39 1.2 ii 40 10 20 1.0 ii 46 46 40.5 1.0 iii a 80 46 408 a 80 40 208 a 80 39 398 a 80 39 268 a 80 32 208 a 80 30 508 a 80 29 198 a 80 26 358 a 80 22 148 a 80 21 178 a 80 20 128 a 80 18 138 a 80 17 158 a 80 17 108 a 80 14 118 version ii potting boxes version iii service-centre see pages 221-227.
212 potting boxes material thermoplastic, abs. good value for money. preferably for potting small assemblies. only partly re- sistant to temperature. refer to the material speci- fications on pages 229-231. standard colour black. version iii part-no. outside dim. in mm wall thickness in mm version abc w 12 12 15 1.0 iii 21 21 12 1.0 iii 25 25 15 1.0 iii 38 20 20 1.0 iii 45.5 30.5 16 1.2 iii 67 35.5 46 1.8 iii a 80 67 469 a 80 45 169 a 80 38 209 a 80 25 159 a 80 21 129 a 80 12 159 service-centre see pages 221-227. potting boxes
|